Skip to Content

DIY Boo Banner in 10 Minutes

DIY Boo Banner in 10 Minutes

I believe the only thing I love more than Halloween decorations are Halloween decorations that are cute and super fast to make! This BOO Banner is absolutely both of those, and a perfect Craft Lightning project.

But that’s all felt! How on earth can it take you less than 10 minutes to make? Answer: I used my Cricut Maker. This post is part of a quick an easy blog hop using Cricut machines–you can catch all the entries for at the bottom of this post. AND, if you DON’T have a Cricut Maker? Make sure you make it to the bottom of the post to WIN a machine of your very own!

Not to fear, though, I am going to include a pdf template if you don’t have one of these spectacular machines. It will just take a bit longer to put together.

I have to thank my friend Carrie for the backgrounds here. We got out of Florida for Hurricane Irma, and her family was gracious enough to let us invade and use her house for pictures. And you read that right, yes, yes I did evacuate with my Cricut Maker.

BOO Banner Materials

  • BOO Banner free Halloween SVG file or PDF template
  • White 12×18 felt
  • Black 12×18 felt
  • 5/8 inch ribbon
  • Hot glue

Cute, fast, and pretty inexpensive to make. Materials for this project should be less than $5. The felt I used for my banner was a little on the stiff side but it should work with softer material.

Make your Halloween Boo Banner

First thing, you’ll need to cut out all your pieces! If you’re Cricut cutting this project, just download the free Halloween SVG file, then upload it into Cricut Design Space to make it.

If you’ve got a Cricut Maker, I know there is some controversy over felt and the mats. I recently did a project where I cut about 25 mats worth of felt. I started with the pink mat which is specifically for fabric, but ended up on the green because it held the felt in place much better.

For a thinner material, I would most definitely use the pink fabric mats. So this is your choice what to use, I personally just had more luck with the green.

Cleaning–I used a piece of tape to rip up the fuzzies left by the felt. It worked well, but I hear using a big piece of extra sticky transfer tape to do this is also effective.

If you’re going the hand-cut route, cut your shapes out from the pdf file and trace onto the felt. Use the photo below for a reference for how many of each need to be cut.

Once the cuts are done, you’ll need your hot glue gun to put it quickly together.

Lay the long rectangular shapes out and glue the ribbon across the flat top of the panels. The panels should be lined up black-white-white-white-black.

Fold the small flap overlay over the ribbon and glue down in the front and back of each panel. White panels get a black flap, and black panels get a white flap.

After the flaps are on the top, glue the letters and ghosts onto the banner. The ghosts go on the black banner, and BOO is spelled across the white panels.

The ghosts have eyes and mouths, so make sure you get those glued to the ghosts.

As an added bit of decoration, tie a bow from the ribbon and glue to the tops of the panels with ghosts.

That’s it! Shouldn’t take but about ten minutes for it all to come together. Projects this fast make me love my Cricut so much!!

 

Paula Biggs

Owner at Frog Prince Paperie
Paula Biggs is a party planner, DIY crafter, and owner of Frog Prince Paperie, where you can find hundreds of party, craft and lifestyle ideas.

15 DIY Halloween Decoration Project Tutorials - Amanda's Craft Corner

Saturday 10th of October 2020

[…] DIY Boo Banner in 10 Minutes– by Paula Biggs for Frog Prince Paperie […]

10 Last Minute Halloween Projects with Cricut - Kingston Crafts

Tuesday 26th of March 2019

[…] Mantel looking a little bare? In just ten minutes you can create this gorgeous boo banner from Frog Prince Paperie. […]

Last Minute Halloween Projects You Can Make Today | Cricut

Friday 27th of October 2017

[…] […]

14 Unique & Easy Halloween DIY Project Ideas Cut Files

Wednesday 25th of October 2017

[…] Boo Banner: How would you like to add an adorable, yet elegant, Halloween banner to your mantle in a matter of minutes? It’s possible! This DIY blogger created an incredible Boo Banner with some felt and a Cricut Maker, amazing! Find out how to make your own. […]

10 Spooktacular Halloween Garland and Bunting Crafts | Random Acts of Crafts

Monday 16th of October 2017

[…] 4. Source:  Frog Prince Paperie […]