Skip to Content

Valentines Mini Heart Banner with SVG

Valentines Mini Heart Banner with SVG

Ready for a super fast Valentine craft? In this Craft Lightning post, I’m going to show you how to make this super cute Valentines Mini Heart Banner. This is a Cricut project, but if I hear enough feedback, I can set it up as a printable template as well (it’ll just take a bit longer than 15 minutes to make).

How to Make a Valentines Mini Heart Banner

In true Craft Lightning style, the time is short, and so is the materials list. Here’s what you’ll need to make this cute little accent bunting:

The length of this banner is totally up to you–it’s not pre-set, so you can make it as short or as long as you need to! And if you want a bigger banner, just enlarge the size of the image to get bigger pennants.

Upload Your Free Valentine SVG

From Cricut’s Design Space, upload your Valentines Mini Heart Banner SVG image. There is only one pennant in the file.

Go ahead and duplicate the pennant as many times as you need to get the length of banner you are looking for.

CUT!

Hit “Make It” and cut out your pennants, tops and hearts. I used a stiffer felt for this project because I didn’t want any droopy pennants.

If you’re using a Cricut Maker, I found it easier to set the blade to the rotary blade. You can also make this with the Air and the fine point blade, but you may have to adjust the blade cutting pressure.

Glue your Felt Mini Valentines Banner Together

Hot glue is so wonderful. It makes projects like these super snappy.

Glue all your little triangles to the ribbon first.

Put the pennant tops on. You’ll have half the pennant hanging off the top, but we’ll flip over the banner soon and take care of that.

Fold the top of the banner pieces around to the back and glue them down.

Add the heart to the center of the front of the banner with a dot of hot glue.

You’re done with your felt Valentines banner!

Thanks for checking out another Craft Lightning post–don’t forget to go visit our wonderful hosts below and see more great (quick) Valentines projects!!


 

Paula Biggs

Owner at Frog Prince Paperie
Paula Biggs is a party planner, DIY crafter, and owner of Frog Prince Paperie, where you can find hundreds of party, craft and lifestyle ideas.

Free SVG Files for Valentine's Day - Hey, Let's Make Stuff

Thursday 19th of December 2019

[…] […]

Sandra L Garth

Saturday 27th of January 2018

This would be so cute on the front of a dessert table. Thanks for the inspiration!

Patti Blankenship

Thursday 18th of January 2018

This is sooo cute! I do not have a Cricut though and I would love and appreciate a printable template, especially for the top piece. I have never seen that design used on the top to make both sides look finished. Love it! Thanks for sharing your creation. Have a blessed day.

DIY Valentines With Your Cricut Machine - The Country Chic Cottage

Saturday 13th of January 2018

[…] Valentine’s Mini Heart Banner […]